Steam Boiler For Brewery
video
Steam Boiler For Brewery

Steam Boiler For Brewery

Liquefied gas boilers are a category of thermal equipment powered primarily by liquefied gaseous fuels, the most common variants being liquefied petroleum gas (LPG) and liquefied natural gas (LNG). After the liquefied fuel undergoes vaporization treatment, it mixes fully with air inside the combustion chamber and undergoes stable combustion. The heat generated from this chemical reaction is transferred to circulating water inside the boiler vessel, which can then produce hot water for heating supply or high-temperature steam to support production procedures such as distillation, fermentation and beverage processing. Compared with coal-fired or diesel-fired boiler units, liquefied gas boilers feature cleaner combustion, lower pollutant emissions and simpler daily maintenance routines.
Send Inquiry
Description

Steam Boiler for Brewery
The electric heating boiler of the brewery is a device specifically designed to provide stable and clean thermal energy for the beer brewing process. It uses electrical energy (instead of traditional gas, oil or coal) as the energy source to heat water to high-temperature hot water or saturated steam, to meet the process requirements of each stage in the beer production.
In simple terms, it is the "electric stove" or "electric steam generator" of the brewery, providing heat for crucial steps such as saccharification, boiling, sterilization, and cleaning.                          
                             

 

Steam Boiler for Brewery

Why do breweries need boilers?

Why do breweries need boilers?
Beer brewing is a process that requires precise temperature control. The main heat-related steps include:
Sugarification (Mashing): Converting the starch in malt into sugar requires precise temperature control at different temperature segments (such as 45°C, 63°C, 72°C).
Boiling: Boiling the wort, adding hops, and evaporating excess water and undesirable flavor substances.
Cleaning and Disinfection (CIP): Performing high-temperature cleaning and sterilization on all pipelines, fermentation tanks, and filling equipment, which is crucial for ensuring the quality and safety of the beer.
Heating/Water Supply: Providing heating and production water for the factory.
Traditional boilers use fossil fuels, while electric heating boilers offer another more modern option.

 

Application

The specific application locations of electric heating boilers in breweries

1. Saccharification Workshop (Mashing House) - Core Heat Demand
This is the most crucial application site for the thermal energy of the boiler. The saccharification process requires precise temperature rise, insulation, and staged heating.
Heating the saccharification mash: The hot water generated by the boiler undergoes heat exchange through the jackets at the bottom of the saccharification and gelatinization tanks or through built-in coils. According to the process requirements, the mash is gradually heated to specific temperatures such as 45°C → 63°C → 72°C for protein denaturation, saccharification, and gelatinization.
Hot water rinsing: After saccharification is completed, hot water (approximately 76-78°C) is used to wash the malt residue to extract as much fermentable sugar as possible. This hot water is usually also provided by the boiler.
2. Boiling workshop (Brew Kettle) - Maximum heat demand
Malt extract boiling: This is the most energy-intensive stage in the entire brewing process. The high-temperature steam or superheated hot water generated by the boiler passes through the jacket at the bottom of the boiling pot or the built-in calandria (tubular heat exchanger) to provide strong boiling energy for the malt extract. The boiling process usually lasts for 60 to 90 minutes and requires continuous large-scale heating.
3. CIP cleaning system (Cleaning-in-Place) - Key hygiene guarantee
CIP is the lifeline for ensuring hygiene and safety in breweries, and it relies almost entirely on the heat source provided by boilers.
Heating cleaning solution: When preparing CIP cleaning solution (such as acid or alkali solution), heating is required. Usually, it is recommended to heat to 65°C - 85°C to enhance its chemical activity and achieve the best cleaning and sterilization effect.
Equipment piping sterilization: After cleaning is completed, all equipment in contact with the materials, such as fermentation tanks, sake tanks, pipelines, and filling equipment, need to undergo high-temperature hot water or steam sterilization (SIP, Sterilize-in-Place). Usually, hot water at 85°C or above is maintained for 30 minutes or short-term sterilization with 121°C steam. Electric heating boilers can provide pure steam without combustion by-products pollution, and are very suitable for this stage.
4. Yeast propagation system
Temperature control: The expansion and preservation of yeast require being carried out under specific constant temperatures. The heat source provided by the boiler (through the heat exchanger) is used to maintain the temperature of the yeast tank, ensuring that the yeast is in the optimal active state.
5. Packaging Workshop (Packaging Hall)
Pasteurization: During the filling process, for beers that need to be stored for a long time (such as bottled or canned beers), a pasteurization machine is used. The beer inside the machine is gradually heated to around 60°C by hot water and kept at this temperature for a certain period of time to kill the yeast and other bacteria in the beer. This equipment requires a large amount of hot water.
Equipment cleaning and disinfection: After the daily work of the filling machine, the cap machine, conveyor belt, etc. need to undergo thorough CIP cleaning and disinfection, and the boiler is also required to provide heat sources.
6. Other auxiliary facilities
Heating and domestic hot water: Provide winter heating for all office areas, laboratories, changing rooms, etc. in the entire factory, as well as domestic hot water throughout the year.
Laboratory: Some testing equipment and small-scale experiments in the laboratory also require hot water.

 

Steam Boiler for Brewery
Steam Boiler for Brewery

Parameter:

Category Parameter Description & Specification Example / Options

 

 

 

 

Core Performance



Rated Power Input Total connected electrical load of all heating elements. e.g., 144 kW
Steam Capacity / Output Mass of steam produced per hour at a specific pressure. e.g., 200 kg/h @ 7 bar
Maximum Operating Pressure The standard working pressure of the boiler. e.g., 7 bar (g) or 10 bar (g)
Design Pressure The maximum pressure the pressure vessel is built to withstand. e.g., 8.5 bar (g)
Saturated Steam Temperature Temperature of steam at the operating pressure. e.g., ~170°C (at 7 bar)

 

 

 

 

Electrical Data



Supply Voltage & Phase The required mains electrical supply. 400 VAC, 3-Phase, 50/60 Hz
Total Current Draw (FLA) Full Load Amperage at the specified voltage. e.g., ~208 A (for 144kW @400V)
Heating Element Stages Number of independent heating circuits for modulation. e.g., 6 Stages (24kW each)
Control Circuit Voltage Voltage for the PLC and control systems (safety extra low voltage). 24 VDC
Cable Specification (Power) Minimum cross-section for main power inlet cable. e.g., 3x70 mm² + PE

 

 

 

 

 

Physical Specifications




Dimensions (H x W x D) Overall footprint of the boiler unit. e.g., 1800 x 1000 x 900 mm
Weight (Empty / Operating) Weight without water and when filled for operation. e.g., 280 kg / 550 kg
Steam Outlet Connection Size and type of the main steam nozzle. e.g., DN50 (2"), PN16 Flange
Feedwater Inlet Connection Size and type for the water supply line. e.g., DN20 (¾"), Threaded
Blowdown Connection Size and type for the bottom blowdown valve. e.g., DN15 (½"), Threaded
Safety Valve Connection Size and type for the pressure relief valve. e.g., DN20 (¾"), Threaded

 

 

 

Control System & Automation


Controller Type The core control unit. PLC with Color Touchscreen HMI
Modulation Type How the boiler adjusts its power output. Step Modulation (6-stages)
Communication Protocol For integration into Brewery Management Systems. Modbus RTU, Profinet, Ethernet/IP
Interface & Data Logging 7-inch Touchscreen, USB Data Export
Safety & Protection  Features

Primary Safety Controls Mandatory safety devices. 2x High-Pressure Limit Switches, 1x Low Water Cut-Off (Probe)
Secondary Safety Devices Redundant or additional safety. Mechanical Pressure Relief Valve, Visual Water Level Gauge
Electrical Protections Main Circuit Breaker, Thermal Overload Prot., Earth Fault Protection

 

 

 

 

Optional Features



Water Treatment Integration Input for Conductivity Probe (Auto Blowdown), Output for Dosing Pump
Feedwater System Integrated / External Feedwater Pump with Variable Frequency Drive (VFD)
Condensate Return Interface for condensate return pump (4-20mA signal)
Construction Material Stainless Steel Heater Tubes (optional), Carbon Steel Vessel
Insulation Dual-layer, mineral wool, < 40°C Surface Temp.

 

Accessories

 

Steam Boiler for Brewery

 

Packing and Delivery

 

 

 

Steam Boiler for Brewery

Certificate

Steam Boiler for Brewery

Exhibition Show

 

Steam Boiler for Brewery

Hot Tags: steam boiler for brewery, China steam boiler for brewery manufacturers, suppliers, factory, steam generator boiler

Send Inquiry

(0/10)

clearall