Reverse Osmosis Water Treatment Machine
This RO water treatment machine is exactly what you need for consistent, clean water in your factory. Whether you're using it for boilers, making drinks, or food processing, it turns your raw water into water that meets all your production requirements - stripping out all the dirt, chemicals, and junk you don't want in your process.
We built it for real factory life: it's compact enough to fit into most existing spaces, no complicated setup needed. It runs on its own, so you don't have to assign someone to babysit it 24/7. It's built tough to last, with very little maintenance required. That means lower ongoing costs, and its energy-saving design keeps your utility bills down month after month.
Products Characters
1. High Filtration Precision
It doesn't just filter big particles - it traps even tiny impurities, bacteria, heavy metals and organic contaminants in your source water. Even after months of use, your water quality stays consistent and meets your production standards.
2. Modular Combined Design
The system is built in modules, so you can start with the capacity you need now. If your production grows later, you can add more units or upgrade without tearing down the whole setup.
3. Corrosion Resistant Construction
All the main pipes and membrane housings are made of high-grade stainless steel. That means it holds up well against different water types and tough working conditions, so you don't have to worry about rust or leaks early on.
4. 24-hour Non-stop Water Supply
It can run around the clock, keeping your water flow steady even during your busiest production hours. No need to stop the line because of water shortages..
5. Multiple Intelligent Protection Functions
It has built-in safeguards like high/low pressure cut-off, no-water auto-shutoff and overload protection. These stop the system from running when something's wrong, so you avoid unnecessary breakdowns and downtime.
6. Wide Raw Water Adaptability
It works with most common water sources - tap water, well water, even surface water. We design it to handle different regional water qualities, so it performs reliably no matter where your factory is
7. Process-grade Water Output
The treated water is clean enough to use directly in production, mixing and cleaning processes. That means you don't need extra water treatment steps, saving you time and cost on additional equipment.
Flow Chart
The primary purpose of RO Water Treatment
The most essential role of RO water treatment is to filter out sediment, impurities, limescale, heavy metals, bacteria and other contaminants from raw water.
It also reduces water hardness and keeps water quality stable throughout the brewing and bottling process.
Technical Parameter
|
Model |
Capacity of water (Ton/hour) |
General Power (KW) |
Size (L*W*H) |
Weight |
|
DH-500L/H |
0.5 |
2.75 |
1540*900*1820 |
280 |
|
DH -1000L/H |
1 |
3.75 |
1970*900*1940 |
510 |
|
DH -2000L/H |
2 |
4.75 |
4850*700*2050 |
710 |
|
DH -3000L/H |
3 |
5.75 |
6000*800*2200 |
800 |
|
DH -4000L/H |
4 |
7.5 |
7000*900*2400 |
1100 |
|
DH -5000L/H |
5 |
12.5 |
8000*1000*2700 |
1550 |
|
DH -6000L/H |
6 |
15 |
8300*1000*2300 |
1700 |
|
DH -12000L/H |
12 |
19 |
8500*1600*1920 |
2550 |
|
DH -15000L/H |
15 |
19 |
10100*1870*3000 |
4050 |
|
DH -20000L/H |
20 |
22.5 |
10000*1700*4200 |
4600 |
|
DH -30000L/H |
30 |
37.5 |
13000*1900*3500 |
6000 |
Inquiry Guide for RO Water Treatment System
To provide you with a correct and suitable solution, we need to confirm a few details with you:
What is your water source? For example, tap water, municipal water, well water, underground water, etc.
What treatment capacity do you need? Such as 500 liters per hour, 1000 liters per hour, or higher.
Where will the equipment be used? That is the application, such as brewing, filling, or other industries.
What are your requirements for the treated water quality?
What is the approximate installation space for the equipment?
With the above information, we can create a solution that perfectly matches your needs.
RO Water Treatment System FAQ
Q1: Can your RO system keep producing stable water quality for production?
A: Absolutely. We build our RO systems to keep water quality consistent, even if your source water changes. We add the right pretreatment and control logic to avoid sudden spikes in TDS or performance drops over time, so your process, soft, or pure water stays reliable.
Q2: How much water does an RO system waste? Is it efficient?
A: We design each system's recovery rate based on your actual source water. Most industrial units run at 50%–75% recovery, which means less waste and lower long-term water bills. With proper pretreatment, we can even go higher if needed.
Q3: How long do RO membranes last, and what's the real cost to replace them?
A: With regular maintenance, membranes usually last 2–3 years. We'll help you map out the full annual operating cost upfront, including membrane replacements, filters, and chemicals, so you know exactly what to budget for.
Q4: How much electricity does an RO system use? Can it save energy?
A: Power use depends on your flow rate and pressure needs. We use high-efficiency pumps and optimized pressure control to keep energy costs low. Just tell us your required capacity, and we'll give you a clear estimate of power consumption.
Q5: What if my source water is poor quality or changes a lot?
A: We always start with a water analysis to design the right pretreatment for you-like multimedia filters, softeners, or anti-scalant dosing-to protect your RO membranes and keep the system running reliably even in tough conditions.
Q6: Is the system fully automatic? Do I need full-time staff to run it?
A: Our industrial RO systems run automatically, with self-monitoring, auto-flush, and built-in fault protection. Day-to-day operation needs almost no attention-just routine checks and occasional filter changes.
Q7: How much space does a complete RO system take up?
A: These systems are compact and modular. We'll share layout dimensions early on to make sure it fits your space, whether that's a small plant room or a dedicated treatment area.
Q8: Will the system shut down unexpectedly or damage itself?
A: No. Every system includes built-in safeguards: low-pressure shutdown, high-pressure cut-off, dry-run protection, and alarm alerts. These prevent damage and help you avoid unplanned downtime.
Hot Tags: ro water treatment system for industrial use, China ro water treatment system for industrial use manufacturers, suppliers, factory, 3 tier brewing system, basic brewing equipment, beer filter homebrew, best beer brewing equipment, kombucha commercial brewing equipment, portable beer brewing machine
